產品名稱：電壓擊穿試驗儀漆膜擊穿強度試驗儀絕緣材質電壓擊穿試驗儀
產品型號：BDJC-50KV
控制方式：微機控制
滿足標準：GB1408-2006 絕緣材料電氣強度試驗方法
GB/T1695-2005 硫化橡膠工頻電壓擊穿強度和耐電壓強度試驗
GB/T3333 電纜紙工頻電壓擊穿試驗方法
HG/T 3330絕緣漆漆膜擊穿強度測定法
GB12656 電容器紙工頻電壓擊穿試驗方法
ASTM D149 固體電絕緣材料在工業電源頻率下的介電擊穿電壓和介電強度的試驗方法.
Product Name: voltage breakdown tester
Item number: BDJC-50KV
Control mode: microcomputer control
Satisfaction criteria: GB1408-2006 insulating materials, electrical strength, test methods
Test for power frequency breakdown strength and voltage strength of GB/T1695-2005 vulcanizate
Test method for power frequency voltage breakdown of GB/T3333 cable paper
Test method for breakdown strength of HG/T 3330 insulating paint film
Test method for power frequency voltage breakdown of GB12656 capacitor paper
Test method for dielectric breakdown voltage and dielectric strength of ASTM D149 solid electrical insulating materials at industrial power frequency
一、漆膜擊穿強度試驗儀絕緣材質電壓擊穿試驗儀 ，適用范圍及功能
電壓擊穿試驗儀, 主要適用于固體絕緣材料（如：塑料、橡膠、薄膜、樹脂、云母、陶瓷、玻璃、絕緣漆等介質）在工頻電壓或直流電壓下?lián)舸?qiáng)度和耐電壓的測試。
電壓擊穿試驗儀,由電腦控制，通過我公司自主研發的全新智能數字集成電路系統與軟件控制系統兩部分來完成，使升壓速率真正做到勻速、準確，并能夠準確測出漏電電流的數據。
可實時動態繪制試驗曲線，顯示試驗數據，判斷準確，并可保存，分析，修改，打印試驗數據。
Voltage breakdown tester, scope of application and function
Voltage breakdown testing instrument, mainly applicable to solid insulation materials (such as: plastic, rubber, film, resin, mica, ceramic, glass, insulating paint and other media) in the frequency of the voltage or DC voltage breakdown strength and voltage withstand test.
Voltage breakdown testing instrument, computer control, system two parts to complete control through the new inligent digital integrated circuit and software developed by our company, so that the pressure rate truly uniform and accurate, and can accuray measure the leakage current data.
It can draw the test curve in real time, display the test data, judge accuray, and save, analyze, modify and print the test data.
1、本儀器在試驗過程中可對升壓擊穿過程繪制實時曲線，每次試驗的升壓曲線都由不同顏色構成，試驗結束后可疊加對比材料的試驗數據重復性。
2、可以隨時調取當前及歷史試驗數據進行查看，編輯及修改實驗結果。
3、試驗過程中可以隨時修改試驗條件及存儲路徑及自動存儲試驗結果。
4、試驗過程中，可隨時通過軟件決定本次試驗是否有效，方便篩選試驗結果。
5、可對軟件設置密碼，生成密碼保護，做到專機專人操作，避免無關人員誤操作。
6、 可對試驗結果編輯修改后打印，方便操作 更加人性化。
7、可對一組試驗中曲線數據的試驗結果是否進行人為選定 。
8、本儀器采用先進的無觸點原件勻速調壓方式，淘汰同類產品中機械傳動升壓方式。
1. During the test, the instrument can draw a real-time curve for the process of boosting and breakdown. The boosting curves of each test are composed of different colors. After the test, the repeatability of the experimental data of the contrast material can be superposed.
2, you can always transfer the current and historical test data to view, edit and modify the experimental results.
3. The test conditions, storage paths and automatic storage test results can be modified at any time during the test.
4, the test process can be determined at any time through the software test, the test is effective, easy to screen test results.
5, you can set the password for the software, generate password protection, so that the special plane operation, to avoid irrelevant personnel misoperation.
6, the test results can be edited, modified, printed, easy to operate, more humane.
7, can be a set of tests in the curve data test results are artificially selected.
8 、 this instrument adopts advanced contactless original uniform pressure regulation mode, and eliminates the mechanical drive step up mode in similar products.
二、漆膜擊穿強度試驗儀絕緣材質電壓擊穿試驗儀 ，技術要求：
01、輸入電壓： 交流 220 V
02、輸出電壓： 交流 0--50 KV ;
直流 0—50 KV
03、電器容量： 3KVA
04、高壓分級： 0-10KV，0--50KV，
05、升壓速率： 100V/S 200V/S 500 V/S 1000 V/S 2000V/S 5000V/S 等
（備注：滿足標準要求并可以根據用戶需求設定不同的升壓速率）
06、試驗方式：
直流試驗：1、勻速升壓 2、梯度升壓 3、耐壓試驗
交流試驗：1、勻速升壓 2、梯度升壓 3、耐壓試驗
07、電壓擊穿試驗儀 ，試驗介質：空氣，試驗油
08、安裝靈敏度較高的過電流保護裝置保證試樣擊穿時在0.05S內切斷電源。
09、采用智能集成電路進行勻速升壓。
10、支持短時間內短路試驗要求。
11、電壓試驗精度： ≤ 1％。
12、試驗電壓連續可調： 0--50KV。
13、電流可采集到m*。
14、出具*計量單位校準檢定證書或出具客戶計量單位的證書。
15、電源：220V±10%的單相交流電壓和50Hz±1%的頻率。
16、電流電壓穩定度: 外界電源電壓波動10%時
Two 、 voltage breakdown tester, dielectric breakdown strength tester, technical requirements:
01 、 input voltage: AC 220 V
02, output voltage: AC KV 050;
DC 0 - 50 KV
03, electrical capacity: 3KVA
04, high grade: 0-10KV, 050KV,
05, step-up rate: 100V/S, 200V/S, 500, V/S, 1000, V/S, 2000V/S, 5000V/S, etc.
(Note: meet the standard requirements and set up different step-up rate according to the user's demand)
06, test methods:
DC test: 1, uniform step-up 2, gradient step-up 3, withstand voltage test
AC test: 1, uniform step-up 2, gradient step-up 3, pressure test
07 、 voltage breakdown tester, test medium: air, test oil
08 、 installation of high sensitivity over-current protection device to ensure that when the sample breakdown, cut off the power supply in 0.05S.
09, the inligent integrated circuit is used to increase the speed at a constant speed.
10. Support short circuit test in short time.
11, voltage test accuracy: less than 1%.
12, the test voltage can be adjusted continuously: 050KV.
13 、 current can be collected to mA level.
14, issued by the national level measurement unit calibration certificate or issued by the customer designated measurement unit certificate.
15, power supply: 220V + 10% single-phase AC voltage and 50Hz + 1% frequency.
16, current and voltage stability: outside power supply voltage fluctuation 10%
三、漆膜擊穿強度試驗儀絕緣材質電壓擊穿試驗儀 安全保護
電壓擊穿試試驗儀器介電擊穿強度試驗儀，電路保護控制：
（1）超壓保護 （2）過流保護 （3）短路保護（4）漏電保護 （5）軟件誤操作保護
高壓輸入回路斷電保護控制：
（1）總電源開關 （2）調壓器復位開關 （3）高壓斷電開關
（4）試驗箱門安全開關 （5）高壓回路開關 （6）漏電保護開關
Three, safety protection
Voltage breakdown test instrument dielectric breakdown strength tester circuit protection control:
(1) over voltage protection (2) over-current protection (3) short circuit protection (4) leakage protection (5) software misoperation protection;
High voltage input circuit power-off protection control:
(1) total power switch (2), voltage regulator reset switch (3) high voltage power off switch
(4) test box door safety switch (5) high voltage circuit switch (6) leakage protection switch;
四、介電擊穿強度試驗儀主要配置
標準配置
序號 名稱 配置 備注
01 試驗主機 一臺
02 控制裝置 一套
03 試驗電極 二套（國標1408.1）
04 試驗油箱 二只
05 放電系統 一套
06 控制系統 一套
07 數據采集系統 一套
08 試驗軟件 一套 光盤
09 計算機 一套 品牌
10 噴墨打印機 一臺 品牌
11 產品使用說明書 一份
12 計量證書 一份
13 產品合格證 一份
Four 、 dielectric breakdown strength tester is mainly configured
Standard configuration
Serial number name configuration note
01 test host one
02 control device set
03 test electrode two sets (GB 1408.1)
04 test tank two
05 a set of discharge systems
06 control system set
07, a data acquisition system
08 test software, a CD-ROM
09 computer brand
10 inkjet printer a brand
11 a copy of the product instruction manual
12 a certificate of measurement
13 product qualification certificate
五、電壓擊穿試驗儀介電擊穿強度試驗儀,設備安全說明：
1、設備要安裝單獨的保護地線。接保護地線，主要是減少試樣擊穿時對周圍產生的較強的電磁干擾。也可避免控制計算機失控。
2、該試驗設備的電路設有多項保護措施，主要有：過流保護、失壓保護、漏電保護、短路保護、直流試驗放電報警等。
3、接地要求： 儀器需要單獨接地，接地附合國家標準要求，金屬棒深埋地下至少要1.5米以下。
4、該試驗設備的電路設有多項保護措施，主要有：過流保護、失壓保護、漏電保護、短路保護、直流試驗放電報警等。
Five 、 voltage breakdown tester, dielectric breakdown strength tester, equipment safety instructions:
1. The equipment shall be provided with a single protective earth wire. The protective earth wire is mainly used to reduce the strong electromagnetic interference produced by the breakdown of the sample. Computer control can also be avoided.
2 、 the circuit of the test equipment has a number of protective measures, including over-current protection, voltage loss protection, leakage protection, short-circuit protection, DC test, discharge alarm, etc..
3 、 grounding requirements: the instrument needs to be grounded separay, and the ground meets the requirements of the national standard. The metal bar is buried at least 1.5 meters deep.
4 、 the circuit of the test equipment has a number of protective measures, including over-current protection, voltage loss protection, leakage protection, short-circuit protection, DC test, discharge alarm, etc..
六、電壓擊穿試驗儀常規型號為：
BDJC-10KV
BDJC-20KV
BDJC-30KV
BDJC-50KV
BDJC-100KV
Six 、 voltage breakdown tester conventional model for:
BDJC-10KV
BDJC-20KV
BDJC-30KV
BDJC-50KV
BDJC-100KV
北廣公司其它絕緣材料檢測儀器:
BDJC-0-100KV 介電擊穿試驗儀
BDJC系列絕緣材料工頻率介電擊穿試驗儀
BDJC系列電壓介電強度試驗儀器
BDJC系列 電壓擊穿試驗儀
BDJC系列絕緣漆漆膜擊穿強度試驗儀
BDJC電容器紙工頻電壓擊穿試驗儀
EST-121 體積表面電阻率測定儀
GDAT-A介質損耗測試儀/介電常數測試儀
GDAT-C新型介電常數介質損耗測試儀
BDH 耐漏電起痕試驗儀
BDH-B耐電弧試驗儀
Canton company other insulating materials testing instruments:
BDJC-0-100KV dielectric breakdown tester
Dielectric breakdown tester for BDJC series insulation materials at power frequency
BDJC series voltage dielectric strength test instrument
BDJC series voltage breakdown tester
Tester for breakdown strength of BDJC series insulating paint film
BDJC capacitor paper power frequency voltage breakdown tester
EST-121 volume surface resistivity meter
GDAT-A dielectric loss tester / dielectric constant tester
GDAT-C new dielectric constant dielectric loss tester
BDH creepage proof tester
BDH-B arc resistance tester
：
Contact number: :
