廣州電子萬能材料拉力試驗機 組成
萬能材料試驗機是由測量系統、驅動系統、控制系統及電腦（電腦系統型拉力試驗機）等結構組成。
一.測量系統
1． 力值的測量
2． 變形的測量
3． 橫粱位移的測量
二.驅動系統
主要是用于試驗機的橫梁移動，其工作原理是由伺服系統控制電機，電機經過減速箱等一系列傳動機構帶動絲桿轉動，從而達到控制橫梁移動的目的。通過改變電機的轉速，可以改變橫梁的移動速度。
三.控制系統
顧名思義，就是控制試驗機運作的系統，人們通過操作臺可以控制試驗機的運作，通過顯示屏可以獲知試驗機的狀態及各項試驗參數，若該機帶有電腦的話，也可以由電腦實現各項功能并進行數據處理分析、試驗結果打印。試驗機同電腦之間的通信一般都是使用RS232串行通信方式，它通過計算機背后的串口（COM號）進行通信，此技術比較成熟、可靠，使用方便。
四.電腦
用來采集和分析數據，進入試驗界面后，電腦會不斷采集各樣試驗數據，實時畫出試驗曲線，自動求出各試驗參數及輸出報表。
Form
Universal material testing machine is composed of measuring system, drive system, control system and computer (computer system type tensile testing machine).
I. measuring systems
Measurement of 1. force values
2. measurement of deformation
Measurement of displacement of 3. transverse beams
Two. Drive system
The utility model is mainly used for the crossbeam movement of the test machine, and the working principle of the utility model is that the motor is controlled by a servo system, and a series of transmission mechanisms, such as a motor and a reducer box, are used to drive the screw rod to rotate, so as to control the moving of the cross beam. By changing the speed of the motor, the moving speed of the beam can be changed.
Three. Control system
As the name suggests, the system is to control the operation of the testing machine, people can use the console to control the operation of the testing machine, and the test parameters through the display screen can learn testing machines, if the machine with a computer, the computer can also realize the functions of data processing and analysis, test results of print. The communication between the tester and the computer usually uses the RS232 serial communication mode. It communicates through the serial port (COM number) behind the computer. This technology is mature, reliable and easy to use.
Four. Computer
To collect and analyze data and to enter the test interface, the computer will continuously collect a variety of test data, real-time test curve drawn, automatic test parameters and output statements.
廣州電子萬能材料拉力試驗機
| | 主要技術指標 | |
| 1 | zui大試驗力： | 0-300KN |
| 2 | 準確度等級: | 1級 |
| 3 | 試驗力示值允許誤差極限： | 示值的±1%以內 |
| 4 | 負荷測量范圍： | 滿量程的2%～100%FS |
| 5 | 試驗力示值分辨率： | zui大試驗力的1/200000 |
| 6 | 變形測量范圍： | 2-100%FS |
| 7 | 變形示值誤差極限： | 示值的±0.5%以內 |
| 8 | 變形分辨力： | zui大變形量的1/200000 |
| 9 | 位移示值極限誤差： | 示值的±0.5%以內 |
| 10 | 位移分辨率： | 0.01mm |
| 11 | 恒位移控制調節精度： | 速率<0.1%FS時，為±2%設定值以內；速率>0.1%FS時，為±0.5%/±1%設定值以內。 |
| 12 | 1位移速度調節范圍： | 0.05-300mm/min |
| 13 | 位移速率控制精度： | 速率<1mm/min時，設定值的±1%以內,速率≥1mm/min時，設定值的±0.5%以內 |
| 14 | 有效拉伸空間距離： | 700mm |
| 15 | 設備主機外形尺寸： | 長×寬×高=850×650×1900（mm） |
| 16 | 軟件及用戶界面： | WINDOWSXP操作環境下的軟件和交互式人機對話操作界面 |
| 17 | 供電電源： | 220V，50Hz、1000W |
Main technical indexes
1 maximum test force: 0-300KN
2 accuracy level: 1
3 test force indication error limit: less than 1% of the indication value
4 load measurement range: full range of 2% ~ 100%FS
5 test force indication value: 1/200000 of maximum test force
6 deformation measurement range: 2-100%FS
7 deformation indication error limit: less than 0.5% of the indication value
8 deformation resolution: 1/200000 of maximum deformation
9 displacement indication limit error: less than 0.5% of the indication value
10 displacement resolution: 0.01mm
11 constant displacement control adjustment accuracy: rate <0.1%FS, is within the setting value of + 2%; rate >0.1%FS, is + 0.5%/ + 1%, within the set value.
121 displacement speed regulation range: 0.05-300mm/min
13 displacement rate control accuracy rate of <1mm/min, the set value is less than 1%, the rate is not less than 1mm/min, within the set value of + 0.5%
14 effective stretch space distance: 700mm
15 main dimensions of equipment mainframe: * * width * high =850 * 650 * 1900 (mm)
16 software and user interface: WINDOWSXP operating environment software and interactive man-machine dialogue interface
17 power supply: 220V, 50Hz, 1000W
廣州電子萬能材料拉力試驗機 功能介紹
01、自動停機：試樣破壞后，移動橫梁自動停止移動（或自動返回初始位置、
02、自動換檔：根據試驗力大小自動切換到適當?shù)牧砍?，以確保測量數據的準確性
03、條件模塊：試驗條件和試樣原始數據可以建立自己的標準模塊的形式存儲；方便用戶的調用和查看，節省試驗時間
04、自動變速：試驗過程的位移速度或加載速度可按預先編制、設定的程序自動完成也可手動改變
05、自動程制：根據試驗要求，用戶可方便的建立自己的試驗模板（方法、，便于二次調用，可實現試驗加載速度、應力、應變的閉環試驗控制
06、自動保存：試驗結束，試驗數據和曲線計算機自動保存，杜絕因忘記存盤而引起的數據丟失
07、測試過程：試驗過程及測量、顯示、分析等均由微機完成
08、批量試驗：對相同參數的試樣，一次設定后可順次完成一批試驗
09、試驗軟件：中文Windows用戶界面，操作簡便
10、顯示方式：數據與曲線隨試驗過程動態顯示
11、曲線遍歷：試驗完成后，可對曲線進行放大再分析，用鼠標查到試驗曲線上各點對應的數據
12、試驗報告：可根據用戶要求進行編輯打印
13、限位保護：具有程控和機械兩級限位保護
14、報告顯示：自動和人工兩種模式求取各種試驗結果，自動形成報表。
Function introduction
01 、 automatic stop: after the sample is damaged, the moving beam stops moving automatically (or automatically returns to the initial position),
02, automatic shift: according to the size of the test force automatically switch to the appropriate range, to ensure the accuracy of measurement data
03 、 condition module: the test condition and the original data of the sample can be stored in the form of the standard module. It is convenient for the user to call and view, and save the test time
04, automatic transmission: the test process of displacement, speed or loading speed can be programmed in advance, set procedures automatically completed, can also be manually changed
05, automatic control system: according to test requirements, the user can easily establish their own test template (method, easy to call two times, can achieve the test load speed, stress and strain closed loop test control
06, automatic storage: the end of the test, test data and curve computer automatically save, to prevent the loss of memory caused by the loss of data
07, test process: the test process and measurement, display, analysis and so on, are completed by the microcomputer
08, batch test: for the same parameters of the sample, once set, can be completed in a batch of tests
09 、 test software: Chinese Windows user interface, easy to operate
10 、 display mode: data and curves are displayed dynamically according to the test process
11, curve traversal: after the test is completed, the curve can be amplified and analyzed, and the corresponding data of each point on the test curve can be found with the mouse
12 、 test report: edit and print according to user's requirement
13 、 limit protection: programmable and mechanical two level limit protection
14, the report shows that: automatic and artificial two kinds of models to obtain all kinds of test results, automatically form reports.
廣州電子萬能材料拉力試驗機 維修保養方法及注意事項:
1、機臺部份，外表經常擦拭，保持清潔。
2、電鍍部份請以機油擦拭，以防止生銹宜保光亮。
3、動力螺桿及螺桿部份請加潤滑油，以保傳動靈敏。（潤滑油采黃油加入少許機油混合即可）。
4、面板（控制箱即顯示器）請用乾布擦拭，嚴防沾水，以免損壞IC電子零件。
5、各項治具及接頭配件請妥置，并擦拭防銹油，以防生銹。
6、上下班必需把電源關掉。
Maintenance methods and matters needing attention:
1, machine parts, surface often wipe, keep clean.
2, plating parts, please use oil to wipe, in order to prevent rust, should be bright.
3, power screw and screw parts, please add lubricating oil, in order to protect the transmission sensitive. (grease, butter, mix with a little oil.).
4, the panel (i.e. display control box) please wipe with a dry cloth to prevent water, so as to avoid damage to electronic components IC.
5. All the fittings and fittings shall be properly placed and cleaned with rust proof oil to prevent rusting.
6. Turn off the power supply to and from work.
開關機注意事項:
1開機時主機和計算機的開機順序會影響計算機的通訊初始化設置，所以務必請用戶嚴格按照上述開機順序進行。
2每次開機后要預熱5分鐘，待系統穩定后，才可進行試驗工作。
3如果剛剛開機，需要再開機，至少保證1分鐘的間隔時間。
4在更換夾具后，首先要注意調整好可調擋圈（上下限位開關）。
5尤其在用小力值傳感器做試驗時，一定要調整好可調擋圈的位置，以免操作失誤而損壞小力值傳感器。不要超過傳感器的額定量程。
6任何時候都不能帶電插撥電源線，否則很容易損壞電氣控制部分。
7試驗過程中，不能遠離試驗機。
8試驗過程中，除停止按鍵和急停開關外，不要按控制盒上的其它按鍵，否則會影響試驗。
9試驗結束后，一定要關閉所有電源。
10本計算機是專門用于試驗機控制和數據處理的，請勿在計算機內安裝其它應用軟件，以免試驗機應用軟件不能正常運行。
11計算機要嚴格按照系統要求一步一步退出，正常關機，否則會損壞部分程序，導致軟件無法正常使用。
12不要使用來歷不明或與本機無關的軟盤在試驗機控制用計算機上寫盤或讀盤，以免病毒感染。
Points for attention of switch machine:
1 boot, the host and computer boot sequence will affect the computer communication initialization settings, so be sure to please users in strict accordance with the above boot sequence.
2, after each boot should be preheated for 5 minutes, until the system is stable before you can carry out the test work.
3 if you just boot, you need to boot, at least guarantee 1 minutes interval time.
4, after changing the fixture, we must first adjust the adjustable ring (upper and lower limit switch).
5, especially in the test with small force sensor, it is necessary to adjust the location of adjustable retaining ring, so as to avoid operating mistakes and damage small force sensor. Do not exceed the rated range of the sensor.
6 do not plug the power cord at any time, otherwise it will damage the electrical control parts easily.
7, the test process can not be far away from the test machine.
8 during the test, do not press the button on the control box except for the stop button and the emergency stop switch, otherwise it will affect the test.
9 after the test, be sure to turn off all the power.
10, this computer is specially used for test machine control and data processing, please do not install other application software in the computer, so as to avoid the test machine application software can not run normally.
11, the computer should strictly in accordance with the requirements of the system, step by step exit, normal shutdown, otherwise it will damage some programs, leading to the software can not be used properly.
12 do not use the machine independent and unknown source or origin or diskette in the testing machine control computer disk write or read the disk, to avoid virus infection.
：
好質量好品牌好服務在北京北廣，更多優惠請。
Contact number: :
Good good quality good service brand in Beijing, please call the Advisory, more concessions.
