當前位置:儀器網 > 產品中心 > 物性測試儀器及設備>其它物性測試儀器及設備>其它> 冷熱沖擊箱-三箱式
返回產品中心>冷熱沖擊箱-三箱式
參考價 | 面議 |
- 公司名稱 上海增達科技股份有限公司
- 品牌
- 型號
- 所在地 上海市
- 廠商性質 其他
- 更新時間 2024/10/17 19:14:03
- 訪問次數 48
當前位置:儀器網 > 產品中心 > 物性測試儀器及設備>其它物性測試儀器及設備>其它> 冷熱沖擊箱-三箱式
返回產品中心>參考價 | 面議 |
冷熱沖擊箱-三箱式型號ModelAZTS130SAZTS320S電源PowerSupply交流380V50赫茲3相+N+PEAC380V50HZ3phase+N+PE電流MaximumCurrent(SUT/SUTH)(A)3946功率MaximumPower(SUT/SUTH)(KW)2225
型號 Model | AZTS 130S | AZTS 320S | |
電源 Power Supply | 交流380V 50赫茲 3相+N+PE AC 380V 50HZ 3 phase+N+PE | ||
電流 Maximum Current (SUT/SUTH) (A) | 39 | 46 | |
功率 Maximum Power (SUT/SUTH) (KW) | 22 | 25.5 | |
使用環境溫/濕度 Operation Environment | +15~+35℃/≤85%RH | ||
形式 Type | 三廂式 Three Zone | ||
控制方式 Control Mode | 獨立的冷端和熱端PID調節,熱量和冷量均可連續調節 Independent PID regulation of consecutive cooling and heating capacity | ||
性能*1 Performance*1 | 溫度范圍 Temperature Range | 低溫區-80℃~+60℃ 高溫區 +60~+200℃ Cold Zone: -80℃~+60℃, Hot Zone: +60~+200℃ | |
溫度波動度 Temperature Fluctuation | ≤±0.5℃ | ||
恢復時間為15分鐘的溫度及負載條件 Test condition with load for 15 minutes recovering time | 帶5kg電路板-55℃/+125℃ -55℃/+125℃ with 5kg electrionic board | ||
觀察窗 Inspection Window | 多層導電膜加熱觀察窗,尺寸W240mmxH310mmx1 Multilayer glasses with conducting film heating, size W240mmxH310mmx1 | ||
控制器 Controller System | AZ-1000控制儀表集成西門子S7可編程控制器 AZ-1000 controller integrated with Siemens S7 PLC | ||
冷凝方式 Condenser | 風冷冷凝器 Air-cooled condenser | 風冷冷凝器 Air-cooled condenser | |
內容積 (升) Interior Capacity (L) | 124 | 319 | |
內尺寸 Interior Size | W(mm) | 580 | 700 |
D(mm) | 510 | 700 | |
H(mm) | 420 | 650 | |
外尺寸 Exterior Size | W(mm) | 1400 | 2740 |
D(mm) | 1780 | 1700 | |
H(mm) | 1950 | 2450 | |
標準配置 Standard Configuration | ● 腳輪/Castors ● 照明/Lighting ● USB接口及歷史數據回放及轉換軟件/USB interface and history data review and converting software | ||
可選配置 Optional Configuration | ○ 電纜孔帶硅膠塞Φ25mm/Cable port with silicon plug Φ25mm ○ 隔板/Shelf ○ 水冷冷凝方式/Water cooled condenser (CST 27 2T, CST 84 2T) ○ 外部插座 220V 10A/Exterior socket 220V 10A ○ LAN接口及遠程控制軟件/LAN interface and remote control software ○ 數字量輸入報警接口x4/Digital alarm input channels x 4 ○ 數字量輸出繼電器接口x4 (試驗品用)/Auxiliary relay digital output channels x 4 (for specimens) ○ 額外溫度采集通道x1 用于測量試驗品溫度 數據可儲存回放(T型熱電偶) Additional temperature sampling channels x 1, for sampling temperature of test specimen, data can be reviewed and recorded (T thermocouple) ○ 根據試驗品溫度切換高低溫區功能 Switching the test zone accoding to the test specimen temperature ○ 額外模擬量采集通道x4 數據可在控制器上儲存回放(PT100,T型熱電偶,4~20mA,0~10V, -10V~10V可選) Additional analog sampling channels x 4, sampling data can be reviewed and recorded (Option: PT100/T thermocouple/4~20mA/0~10V/-10V~10V) ○ 額外模擬量采集通道x8 數據可在控制器上儲存回放(PT100,T型熱電偶,4~20mA,0~10V, -10V~10V可選) Additional analog sampling channels x 8, sampling data can be reviewed and recorded (Option: PT100/T thermocouple/4~20mA/0~10V/-10V~10V) ○ 模擬量輸出通道x3 (設定高溫,設定低溫,采樣溫度) Analog output channels x 4 (Setting high temperature/Setting low temperature/measured temperature) ○ 干燥新風補償/Compressed dry air purging system | ||
*1: 性能指標在室溫為+25℃時測定;傳感器處于空氣處理單元出風口; All the above specifications are measured at +25℃ room temperature and the sensors are installed at blow-out of air conditioning unit; |
*您想獲取產品的資料:
個人信息: